男Ji大巴进入女人的视频,狂野少女电视剧免费播放,国产伦精品一区二区三区妓女,女人下边被添全过视频,少女たちよ在线观看动漫游戏,《年轻女教师2》中文字幕,熟妇女人妻丰满少妇中文字幕,CHINESE老女人老熟妇HD,99亚洲男女激情在线观看

<< Stainless steel outer spherical bearings >>
Product introduction

External spherical ball bearings is a variant of deep groove ball bearing, characterized by its outer ring outer diameter surface for spherical, can be matched into the corresponding concave spherical bearing seat to play a role in adjusting the heart. Mainly used to bear radial load mainly radial and axial joint load, generally should not bear axial load alone, such bearings can be installed separately inner ring (with a full group of rollers and keeper) and outer ring.

Stainless steel bearing collar and rolling body material use with AISI SUS440 stainless steel (domestic number: 9Cr18Mo, 9Cr18) by vacuum quenching and tempering treatment, keep frame and seal ring skeleton material using AISI304 stainless steel (domestic number: 1Cr18). Stainless steel bearings have stronger anti-rust and anti-corrosion compared with ordinary bearing steel, and can be used under -60℃~+300℃ by choosing suitable lubricant and dustproof cover, etc.

Feijie offers more than 220 different types of spherical bearings (in bearing steel and stainless steel).

Type of structure

External spherical ball bearings with top wire: UC200 series (light series), UC300 series (heavy series), and deformation products UB(SB)200 series

Outer spherical ball bearings with taper: UK200 series, UK300 series

External spherical ball bearings with offset sleeve: UEL200 series, UEL300 series, SA200 series

Product features

Corrosion resistant

High loads

Good centring performance

Application areas

Petroleum, chemical, food processing, medical equipment, printing machinery, pharmaceutical machinery and other industries

Product List

Cautions

1Before mounting the bearing on the shaft, the fixing pin of the bearing housing must be removed and the surface of the journal polished smooth and oiled to prevent rust and lubricate the journal (allowing a slight rotation of the bearing on the shaft).

2Apply lubricant to the mating surface of the bearing housing and the bearing, and fit the bearing into the bearing housing. Then put the assembled bearing and housing together on the shaft. Push to the required position for installation.

3Do not tighten the bolts that hold the bearing housing in place yet, to allow the bearing jacket to turn inside the housing. Similarly fit the other end of the bearing and seat on the same shaft, turn the shaft a few turns and let the bearing itself automatically find the right position. Then tighten the bearing housing bolts well.

4Install the eccentric sleeve. First, put the eccentric sleeve on the eccentric step of the inner sleeve of the bearing, and tighten it by hand in the direction of rotation of the shaft. Then insert the small iron rod into or against the countersink hole in the eccentric sleeve. Use a hand hammer to strike the small iron rod in the direction of rotation of the shaft. Make the eccentric sleeve firmly installed, and finally lock the hexagonal screw on the eccentric sleeve.

×

Adhering to the "customer requirements is the pursuit of Feijie, customer support is the foundation of feijie development" belief
It is the prerequisite for Cixi Feijie Bearing Co., Ltd. to stand in the domestic and foreign markets.

Contact us Contact us